Dashboard
RESIDENTIAL
ELEVATORS
Francis Calculator
Cab · Platform · Bracket wall
Download PDF
Clear all
v114 · 2026
Project info
Project name
Builder / homeowner
Address / lot #
Configuration
Configuration type
— select —
HP-1 — Inline, right rail mount
HP-2 — Inline, left rail mount
HP-3 — Inline, rear rail, single opening
HP-4.1 — Pass-through, right rail mount
HP-4.2 — Pass-through, left rail mount
HP-5.1 — Adjacent front & right opening, left rail
HP-5.2 — Adjacent front & right opening, rear rail
HP-6.1 — Adjacent front & left opening, right rail
HP-6.2 — Adjacent front & left opening, rear rail
HP-7.1 — Three opening, right rail (front, rear & left side)
HP-7.2 — Three opening, rear rail (front & both sides)
HP-7.3 — Three opening, left rail (front, rear & right side)
Cab series
— select —
Classic
Signature
Vintage
Farmhouse
Estate
Vision
Shaker
Stainless
Gate type
— select —
Cab height
— select —
6'8" (80")
7'4" (88")
8'0" (96")
Gate height
— select —
COP wall (Curve gate)
COP on a different wall (3" track)
COP on the wall the gate wraps (4" track)
Power gate operator installed
Rail wall location (HP-7)
— select —
Rear wall (most common)
Left wall
Right wall
Hoistway dimensions
Hoistway → Cab
standard
Cab → Hoistway
solve required hoistway
Hoistway → Cab (standard)
Cab → Hoistway (solve for required hoistway)
Width (in)
Depth (in)
Desired clear inside width (in)
Desired clear inside depth (in)
Openings
Select a configuration to set up openings.
General specs
Total travel (in)
Number of stops
Pit depth (in)
Drive type
— select —
Traction
Hydraulic
Overhead — top FF → ceiling (in)
Overhead minimum
Access door above the top landing (EON minimum rises 7")
Occupiable space below pit?
No
Yes
Flooring
Floor thickness
Floor thickness (in)
Standard allowance
Flooring weight (traction only)
Weight per sq ft (lbs)
Standard allowance
Bracket locations
Bracket locations needed
Configuration, hoistway, gate, pit, stops, travel and drive are taken from the panels above.
Floor to floor
Top of hoistway
Overhead (top FF → ceiling) is entered under General specs.
Machine access
Ceiling of hoistway
Hoistway wall, at the top (ceiling is the reference)
Hoistway wall, lower down
Above the top hall door
Top of access hole above top FF (in)
Layout
Brackets
℄ override
Spanish PDF
· bracket sheet in Español (unchecked = English)
Brackets blank = auto (84" max spacing). ℄ override is measured from the front wall (side rail) or left wall (rear rail).
A-1
Cab & platform
BW-1
Bracket wall
Bracket wall layout — BW-1 (11×17)
PDF
SVG
The 11×17 sheet scrolls sideways here — or download the PDF.
Select a configuration, cab series, gate type, and hoistway dimensions to calculate platform sizing.
Back
1 / 8
Project
Next
Download PDF
Steps